Product Details
Uses
- Corrosion protection of splash zone of coast and harbor facilities.
- Corrosion protection of steel and concrete of the underwater area.
Features
- Can be applied both in air or while immersed in fresh or salt water.
- Can easy to apply in water with good adhesion.
- Minimal shrinkage after drying, no pinhole, and can be completed at once.
- Excellent resistance to abrasion and impact.
- Excellent resistance to sea water, alkalis and solvents.
Technical & Physical Data
Instruction for Use
1.Surface preparation:
Steel：Removed all loose rust, soil, grease and other dirt from substrate, using water jet or sand blasting before apply. (Note that a certain surface roughness is required.)
Usage amount: 8 kg/m2 @5m/m
2.Application:
Measure EC-31-A and EC-31-B according to the specified ratio. Mix components EC-31-A and EC-31-B together by hand or power mixer until a uniform color is obtained with no streaks.
- Important Note: The surface of steel, aluminum, stainless steel or cement substrate must have apposite roughness.
Health & Safety
Wash both hands after work. Ensure adequate ventilation when using these products. If working in confined areas, suitable respiratory protective equipment must be used. Wear protective gloves when handling these products. The selected protective gloves must comply with the standard of EN374 or equivalent.
Eye protection should be worn. Safety glasses for side shields must be comply with EN166, ANSI 87.1-2010 or equivalent. Wear suitable protective clothing. Types of protective clothing or equipment must be selected according to the amount and concentration of hazardous materials in a specific workplace.
If contact with skin occurs, it must be removed before curing takes place. Wash off with an industrial skin cleanser followed by plenty of soap and water. Do not use solvent. In case of contact with eyes, rinse thoroughly with plenty of water and seek medical advice if symptoms persist.