PRODUCT

PRODUCTS & SERVICES
  1. ●
  2. Cireco
  3. Products
  4. SioAcryl - Nano-Silica Modified Acrylic Resin Material
  5. SioAcryl EL-6
SioAcryl EL-6
SioAcryl EL-6
Nano-Silica Modified Waterproofing Coating
SioAcryl - Nano-Silica Modified Acrylic Resin Material

Cireco SioAcryl EL-6 is a new-generation technology that makes the active nano-silica colloid of active silicon dioxide to crosslink in acrylic resin to form a structure with high density, high crack resistance, stain resistance, and strong adhesion flexible waterproof coating.

Cireco SioAcryl EL-6 Nano-Silica Modified Waterproofing Coating_PDS(EN) Safety Data Sheet Test Report

Cireco provides various professional geotechnical and construction material and machinery application courses to customers and to whom are interested in Cireco products.

Material and machine training courses

Product Details

Uses 

  • Can be used in places where high strength waterproofing and crack resistance are required.
  • Can be used on concrete, tiles, stone and steel structures.
  • Outdoor and indoor walls, swimming pools, roofs, bathrooms.

Features 

  • Use instantly.
  • Excellent adhesion.
  • Excellent weather resistance.
  • Excellent water resistance.
  • Easy to patch.

Technical & Physical Data

Instruction for Use 
1. Surface preparation : Unfavorable followers of dust, paint, weathering residue, salt, oil, etc. on the working surface must be thoroughly cleaned. Do not apply before rain. All cracks and old joints must be reinforced before applied. Cireco MS-1 can be used to repair large cracks, holes, etc. on the construction surface to enhance the crack resistance.
2. Application : Dilute Cireco SioAcryl EL-6 with two times water. When use the primer, apply it directly to the construction surface to increase the adhesion. Cireco SioAcryl EL-6 can be applied evenly to the construction surface with a brush, roller and spray. The secondary coating needs to be applied more than 2 hour intervals.

*Usage amount:

  • Surface penetration: 0.1 kg / m2 / per each coating (can be applied 1 ~ 2 times)
  • Concrete roof: 0.6 kg / m2 / per coating (should be applied at least 2 times)
  • Exterior wall / vertical surface: 0.4 kg / m2 / per coating (should be applied at least 2 times)

*Important Note : In order to ensure good operability, please stir before use, add water to adjust the viscosity.

Health & Safety 

Wash both hands after work. Ensure adequate ventilation when using these products. If working in confined areas, suitable respiratory protective equipment must be used. Wear protective gloves when handling these products. The selected protective gloves must comply with the standard of EN374 or equivalent.
Eye protection should be worn. Safety glasses for side shields must be comply with EN166, ANSI 87.1-2010 or equivalent. Wear suitable protective clothing. Types of protective clothing or equipment must be selected according to the amount and concentration of hazardous materials in a specific workplace.
If contact with skin occurs, it must be removed before curing takes place. Wash off with an industrial skin cleanser followed by plenty of soap and water. Do not use solvent. In case of contact with eyes, rinse thoroughly with plenty of water and seek medical advice if symptoms persist.

Back